1
Document Revision History
Release
Date
2010
Revision
History
AO
2010
A1
March 2011
General Revision
A2
May 2011
Operating system selection added
PCB Controller types removed
A3
December 2011
Inserted FFC cable – sensor connectivity instructions
A4
May 2012
Replaced P/N table. Replaced Calibration test
A5
July 2012
•
Modified the OQC process
•
Added the
Connecting the Touch Screen Panel
chapter as
part of the work flow
•
Modified Appendix A: The Calibration process
Documentation Copyright
© Copyright 2010 by Lumio Inc. All rights reserved.
Disclaimer
The information in this manual has been carefully examined and is believed to be reliable. Lumio Inc. shall not
be liable for any direct, indirect, incidental, special, exemplary, or consequential damages of any kind, however
incurred, through the use of this product.
Lumio Inc. reserves the right to make changes to any of its products in order to improve reliability, design and
performance. The text and drawings herein are for the purposes of illustration and reference only; the text,
drawings and specifications on which they are based are subject to change without notice.
Warning
Use only Lumio approved parts and materials. Use of non-Lumio parts or approved materials may impair Touch
Screen integration.
Read the entire manual and familiarize all instructions before integrating Touch Screens
.
Technical Assistance
For technical questions and troubleshooting assistance:
Contact the Lumio office closest to you.
Visit us at our website: www.lumio.com.
E-mails: [email protected].
Contact
Lumio Inc
6355 Topanga Canyon Blvd. #335, Woodland Hills, CA, USA 91367
Ph: +1 818 715 9866, Fax: +1 818 715 9853
Email:
