4
Switch Interface Administration
Digital Interfaces
UCS 1000 R4.2 Administration 585-313-507
Issue 3 April 2000 161
The
Card Number:
field is blank in
Figure 91
. After you enter the circuit
card number, certain E1-only fields disappear (
Idle Code:
,
A-LAW or
MU-LAW:
,
and
CRC:
).
The system displays the parameter values for the selected circuit card.
3
Press
F 6
(Cancel) to return to the T1 A/B Robbed-bit E&M menu.
Unassigning T1 A/B
Robbed-bit E&M to
Digital Circuit Cards
Note:
Before attempting to make any assignment changes to circuit
cards, they must be in the MANOOS state. See
Equipment State
on page 103
in
Chapter 3, Voice System Administration
, for
additional information.
If you also change digital protocol assignments on the voice
system, you must make the change on the switch.
To unassign the T1 A/B Robbed-bit E&M protocol to a digital circuit card:
1
Start at the T1 A/B Robbed-bit E&M menu (
Figure 88 on page 151
) and
select:
> Unassign Card
