A
Summary of Commands
restore
UCS 1000 R4.2 Administration 585-313-507
Issue 3 April 2000 560
a port of card
#
. If
port#
is not given, all ports of the card specified are
restored. If no card number or channel number is given, the system
displays a syntax message.
•
-n
— Disables prompting from the system, whether to wait until a conflict
has been resolved (see the
-i
option below) or to terminate the request to
restore.
•
-i
— Enables secondary command registration. If T1 diagnostics are
being run, this option allows “restoring” of another card to be performed.
If
-i
is used and another maintenance command is being run (remove
,
detach
,
attach
,
restore
,
diagnose), the request to restore card is
blocked and a message is printed to the screen. If
-i
is not used and any
maintenance command is being run, the request to restore card is
blocked and a message is printed to the screen.
If the command is permitted to run, a check is made to see if the
command is in conflict with another. A command is in conflict if the card
or card associated with it:
~
Is the T1 card being diagnosed
~
Will cause a change in the existing TDM bus master assignment
~
Has an interdependency with the T1 card being diagnosed (for
example, PRI)
If one of the above conflicts exist and
-n
is not used, the user is asked
whether to wait until the conflict is resolved or to terminate the request. If
