Lucent Technologies R4.2 Administration Download

Page: 243 / 745

Database Administration

Call Data Tables

UCS 1000 R4.2 Administration 585-313-507

Issue 3 April 2000 204

TRASUM Table

The TRASUM table contains the following information:

•

START_TIME is a date field that specifies the start of hour (for example,
10:00:00).

•

CHANNEL is a numeric field that indicates the channel number. This field
can be up to 3 digits in length.

•

CALL_TOT is a numeric field that specifies the total number of calls.

•

DUR_TOT is a numeric field that specifies the total duration in seconds.

Note:

Records are generated on a per-hour and a per-channel basis. No
calls during this hour on this channel result in no record.

OLDCDH View

The OLDCDH view is an ORACLE database view provided to be compatible
with the CDH table that is not supported in newer releases.

Relationship Between the CALL, SERVICE, and EVENT Tables

The relationship between these three call data handling tables is summarized
by the following statements and in

Figure 105 on page 205

•

Each telephone call creates one record in the CALL table.

Summary of Contents for R4.2









































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for R4.2

Reviews:

Related manuals for R4.2

Brands by name

Popular brands

Lucent Technologies R4.2, Administration

Search results

Summary of Contents for R4.2

Reviews:

Related manuals for R4.2

Brands by name

Popular brands