3
Voice System Administration
System Control
UCS 1000 R4.2 Administration 585-313-507
Issue 3 April 2000 90
Stopping the Voice System
This procedure stops the voice system by taking all system channels out of
service with the option to wait for in-progress calls to end. Stopping the
system is usually done when you are performing some type of routine service
such as backup and restore. When the system is stopped, the CPU does the
following:
•
Places the entire system in the idle state when all lines are free
•
Saves internal system tables
•
Turns off voice system processes
Use the following procedure to stop the voice system:
1
Start at the System Control menu (
Figure 54 on page 84
) and select:
The system displays the Wait Time window (
Figure 58
).
Figure 58.
Wait Time Window
> Stop Voice System
