Lucent Technologies CBX 3500 Page 510 Configuration Manual Download | Manualshive

Page: 510 / 888

background image

Beta Draft Confidential

11-4

1/19/05

ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000

Configuring Management Paths
Using MPVCs

Configuring an MPVC

The following sections describe how to define an MPVC connection and configure an
NMS path using a standard or redirect MPVC. To define a standard MPVC
connection, follow the instructions in the next section. To define a redirect MPVC
connection, follow the instructions on

.

Before you configure an MPVC, do the following:

1. Select the switch for which you want to configure the ATM UNI or NNI logical

port endpoint and define the physical port attributes. See the Switch Module
Configuration Guide

for CBX 3500, CBX 500, GX 550, and B-STDX 9000

for more

information.

2. Define an ATM UNI or NNI logical port. See

“Working With ATM Logical Ports”

for more information.

Defining a Standard MPVC Connection

1. Open the object tree for a switch.

2. In the Network object tree, expand the instance node for the network that contains

the switch (see

Figure 3-4 on page 3-5

3. Expand the LPorts class node and expand the instance node for the management

logical port named “

MgmtLPort.SW<

switchname>

” for Endpoint 1. The

<switchname>

should correspond to the name of the switch on which the

management port endpoint resides. The LPort Type field should display
Others:Multi Hop MPVC.

4. Expand the Circuits class node.

5. Select the PVCs class node and perform one of the following:

•

Select Add from the Actions menu.

•

Choose the Add button from the toolbar.

•

Right-click the PVCs class node and select Add from the pop-up menu.

The Add PVC dialog box appears (

Figure 11-2 on page 11-5

«
...
508
509
510
511
512
...
»

Summary of Contents for CBX 3500

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for CBX 3500

Brand: M-LOCKS Pages: 3

Brand: Eaton Pages: 18

Cutler-Hammer IQ DP-4000

Brand: Eaton Pages: 87

Brand: D&R ELECTRONICS Pages: 12

RDS17S-ELITE1-R1

Brand: D&R ELECTRONICS Pages: 12

Brand: BRAVILOR BONAMAT Pages: 76

BIS U-830-4-011-H-1

Brand: Balluff Pages: 2

Aqua-Pure 3MFF100

Brand: 3M Pages: 8

Brand: CAME Pages: 8

Brand: KAR-TECH Pages: 55

BALBOA CS6000B Series

Brand: HydroQuip Pages: 32

Brand: Laser Pages: 3

Brand: RAM Pages: 22

BRAVO FT SB2 06

Brand: Comelit Pages: 16

Brand: Kenco Pages: 15

Brand: HIKVISION Pages: 23

Brand: Buffalo Pages: 2

Brand: Orno Pages: 13

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands