manualshive.com logo in svg

Lucent Technologies CBX 3500, Configuration Manual

The Lucent Technologies CBX 3500 is an advanced telecommunications device, offering exceptional performance and reliability. Equipped with cutting-edge specifications, this product ensures seamless connectivity. Experience its full potential by downloading the user manual for free from our website, providing you with detailed instructions for optimal utilization.

Share
Download
background image

Beta Draft Confidential

Configuring ATM Logical Ports on Frame-based Modules

Defining ATM Direct Trunk and OPTimum Cell Trunk Logical Ports

ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000

1/19/05

4-37

ATM OPTimum Cell Trunks

To implement the ATM OPTimum cell trunk, first configure a UNI DTE feeder logical 
port on the same physical port. (1-port ATM CS DS3/E3 and 1-port ATM IWU 
OC-3c/STM-1 ports can also use a UNI DCE port for this purpose.) 

To configure an ATM OPTimum cell trunk, perform the following steps:

Configuring ATM Direct or OPTimum Cell Trunks

To configure an ATM direct trunk or ATM OPTimum cell trunk logical port:

1. Complete the General tab fields in the Add Logical Port dialog box as described in 

“Defining ATM UNI DCE/DTE Logical Ports” on page 4-15

. Note that 

Table 4-6

 

and 

Table 4-7

 list all possible general and administrative attributes for an ATM 

logical port. The attributes vary depending on the type of IOM.

2. If you are configuring an ATM DS3/E3 UNI module, select a traffic shaper ID by 

clicking on Select. 

Figure 4-8 on page 4-38

 displays the Select Traffic Shaper 

dialog box. 

Choose a value from 1 through 16 to specify the Shaper ID. This list provides both 
VP and VC shaping attributes. Make sure you assign only one trunk logical port 
per shaper ID. Assigning more than one trunk logical port to a given shaper ID 
decreases circuit performance. 

Table 4-14 on page 4-38

 describes the fields in the 

Select Traffic Shaper dialog box. For more information, see 

“Setting the Number 

of Valid Bits in VPI/VCI for the B-STDX 9000” on page 4-5

.

Step 1.

Configure the physical port you want to use for the ATM OPTimum cell trunk 
(see the Switch Module Configuration Guide for CBX 3500, CBX 500, GX 550, 
and B-STDX 9000).

Step 2.

Configure a UNI DTE feeder logical port (

page 4-15

) for the ATM OPTimum 

cell trunk on this physical port. Assign this logical port a minimum amount of 
bandwidth.

Step 3.

Configure the ATM OPTimum cell trunk logical port on the same physical port. 
Assign the remaining bandwidth to this logical port (if there is only one ATM 
OPTimum cell trunk configured on the physical port).

Step 4.

Configure the trunk (see 

Chapter 7, “Configuring Trunks”

).

Summary of Contents for CBX 3500

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for CBX 3500

ABB Relion REC670 Product Manual preview
Relion REC670
Brand: ABB Pages: 138
ABB Relion REC670 Operator'S Manual preview
Relion REC670
Brand: ABB Pages: 116
SAI Connect Operation Manual preview
Connect
Brand: SAI Pages: 16
FAAC J355HA M30-P1 User Manual preview
J355HA M30-P1
Brand: FAAC Pages: 16
Napa 791-1142 Owner'S Manual preview
791-1142
Brand: Napa Pages: 15
Sumner GH5T Operator'S Manual preview
GH5T
Brand: Sumner Pages: 10
Gardeners Snip-n-Spray Manual preview
Snip-n-Spray
Brand: Gardeners Pages: 2
Detection Systems DS7433 Installation Instructions Manual preview
DS7433
Brand: Detection Systems Pages: 2
WAGO 750-626 Manual preview
750-626
Brand: WAGO Pages: 12
Pittway NOTIFIER CBC-CLASS 1 Manual preview
NOTIFIER CBC-CLASS 1
Brand: Pittway Pages: 20
urmet domus 1060/21 Installation And Use Booklet preview
1060/21
Brand: urmet domus Pages: 32
Aiphone JF-1FD Installation & Operation Manual preview
JF-1FD
Brand: Aiphone Pages: 16
SPX 10-13409-01 Instruction Manual preview
10-13409-01
Brand: SPX Pages: 36
Ravaglioli KPX341 Translation Of The Original Instructions preview
KPX341
Brand: Ravaglioli Pages: 68
vistaCNC iMach III P1B Manaul preview
iMach III P1B
Brand: vistaCNC Pages: 7
Comelit MT KIT 04 Technical Manual preview
MT KIT 04
Brand: Comelit Pages: 96
National Instruments NI660 Series User Manual preview
NI660 Series
Brand: National Instruments Pages: 53
Magliner LiftPlus Lite Owner'S Manual preview
LiftPlus Lite
Brand: Magliner Pages: 16

Brands by name

Popular brands

Load more brands