manualshive.com logo in svg

Lucent Technologies CBX 3500, Configuration Manual

The Lucent Technologies CBX 3500 is an advanced telecommunications device, offering exceptional performance and reliability. Equipped with cutting-edge specifications, this product ensures seamless connectivity. Experience its full potential by downloading the user manual for free from our website, providing you with detailed instructions for optimal utilization.

Share
Download
background image

xx

1/19/05

ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000

Contents

Beta Draft Confidential

PNNI Policy-based Routing...................................................................................21-27

Definition of PNNI Policy-based Routing Terms ...........................................21-28
Application of Policy-based Routing ..............................................................21-29
Policy-based Routing Configuration ...............................................................21-31

VNN-PNNI Network Configuration.........................................................21-32

Configuring PNNI Routing....................................................................................21-41

Enabling Name LSA Flooding on the Switch .................................................21-42
Configuring PNNI Node Parameters...............................................................21-43

Adding PNNI Node Parameters................................................................21-43
Adding PNNI Summary Addresses ..........................................................21-48

Configuring an ATM NNI Logical Port..........................................................21-50
Configuring PVCs ...........................................................................................21-54
Configuring SVC and SPVC Parameters ........................................................21-54
Configuring SPVCs (Offnet Circuits) Over PNNI..........................................21-55
Configuring MPVCs........................................................................................21-55
Configuring MSPVCs .....................................................................................21-55
Viewing PNNI Links.......................................................................................21-56

PNNI Trap Support ................................................................................................21-56

Appendix A

Adjusting the CAC

About the Customizable CAC Options..................................................................... A-3

Customizable CAC Example.............................................................................. A-3

Configuring the CAC................................................................................................ A-4

Tuning the CAC ................................................................................................. A-5
Customizing the CAC for VBR-RT, VBR-NRT, and ABR...............................A-7
Customizing the CAC for VBR-NRT and ABR .............................................. A-10

Appendix B

ATM Traffic Descriptors

PCR CLP=0 and PCR CLP=0+1 .............................................................................. B-2
PCR CLP=0 and PCR CLP=0+1 With Tagging ....................................................... B-3
PCR CLP=0+1 .......................................................................................................... B-4
PCR CLP=0+1 With Best Effort .............................................................................. B-4
PCR CLP=0+1, SCR CLP=0, and MBS CLP=0 ...................................................... B-4
PCR CLP=0+1, SCR CLP=0, and MBS CLP=0 With Tagging............................... B-6
PCR CLP=0+1, SCR CLP=0+1, and MBS CLP=0+1.............................................. B-8

Appendix C

Allocating Logical Port Bandwidth on CBX 500 Shared SP Threads

Shared SP Thread Example ...................................................................................... C-2

Summary of Contents for CBX 3500

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for CBX 3500

GE Spacemaker 7-5400 User Manual preview
Spacemaker 7-5400
Brand: GE Pages: 12
FAAC B614 Manual preview
B614
Brand: FAAC Pages: 60
FAAC B614 Instruction Manual preview
B614
Brand: FAAC Pages: 68
MARTINS Industries MTWL User Manual preview
MTWL
Brand: MARTINS Industries Pages: 20
Genie GS-2646 AV Operator'S Manual preview
GS-2646 AV
Brand: Genie Pages: 57
ring Stick Up Cam Wired Manual preview
Stick Up Cam Wired
Brand: ring Pages: 9
Fermax CITYLINE PLATINE VDS Installer Manual preview
CITYLINE PLATINE VDS
Brand: Fermax Pages: 32
Sumner GH5T Operator'S Manual preview
GH5T
Brand: Sumner Pages: 10
Viking ESFR Manual preview
ESFR
Brand: Viking Pages: 53
Tractel Davitrac Installation, Operating And Maintenance Manual preview
Davitrac
Brand: Tractel Pages: 162
Magnavox FW 340C (Spanish) Manual De Usuario preview
FW 340C
Brand: Magnavox Pages: 25
WAGO 750-872/020-000 Manual preview
750-872/020-000
Brand: WAGO Pages: 290
Amplicon Liveline PCI230+ Instruction Manual preview
PCI230+
Brand: Amplicon Liveline Pages: 42
Braun Corporation UVL Series NUVL604XA Service Manual preview
UVL Series NUVL604XA
Brand: Braun Corporation Pages: 38
auna multimedia Graceland Manual preview
Graceland
Brand: auna multimedia Pages: 26
urmet domus mini note 1722/85 Installation Handbook preview
mini note 1722/85
Brand: urmet domus Pages: 72
Grundig MS 235 Manual preview
MS 235
Brand: Grundig Pages: 24
RAM CSS205 User Manual preview
CSS205
Brand: RAM Pages: 36

Brands by name

Popular brands

Load more brands