manualshive.com logo in svg

Lucent Technologies CBX 3500, Configuration Manual

Share
Download
Lucent Technologies CBX 3500 Configuration Manual Download Page 298

Beta Draft Confidential

7-62

1/19/05

ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000

Configuring Trunks
Configuring VNN OSPF

3. In the Administrative tab in the Modify Switch dialog box, select one of the 

following options in the PNNI Name Translation field:

•

Disabled  — (default) Leave this check box unchecked to suppress flooding 
of NAME(3) and SUMM_NM(3) LSAs for the specified switch. Use this 
option if the switch does not need to interoperate with PNNI switches in your 
network.

•

Enabled  — Check this check box to enable flooding of NAME(3) and 
SUMM_NM(3) LSAs for the specified switch. Use this option if the switch 
must interoperate with PNNI switches in your network.

4. Choose OK to save your changes and close the dialog box.

Summary of Contents for CBX 3500

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands