manualshive.com logo in svg

Lucent Technologies CBX 3500, Configuration Manual

The Lucent Technologies CBX 3500 is an advanced telecommunications device, offering exceptional performance and reliability. Equipped with cutting-edge specifications, this product ensures seamless connectivity. Experience its full potential by downloading the user manual for free from our website, providing you with detailed instructions for optimal utilization.

Share
Download
background image

Beta Draft Confidential

Configuring SPVCs

Defining a PMP SPVC (Offnet Circuit)

ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000

1/19/05

18-31

Figure 18-13.

Select Endpoint Dialog Box

If you are creating an Offnet PMP PVC Root from an LPort node, you do not need 
to select an endpoint. Continue with 

“Configuring Offnet PMP PVC Root 

Parameters” on page 18-32

.

5. Select the PMP root endpoint by using either of the following procedures:

•

“Selecting an Endpoint From a Switch”

 below.

•

“Selecting an Endpoint From a Physical Port”

 below.

Selecting an Endpoint From a Switch

To select an endpoint from a switch:

1. In the Select Endpoint dialog box, expand the node for the desired switch for the 

endpoint.

2. Expand the LPorts node under the switch and select the desired LPort.

3. Choose OK and continue with 

“Configuring Offnet PMP PVC Root Parameters”

 

below.

Summary of Contents for CBX 3500

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for CBX 3500

ZKTeco SC800 Quick Start Manual preview
SC800
Brand: ZKTeco Pages: 18
WAGO 750 Series System Manual preview
750 Series
Brand: WAGO Pages: 56
KAPTARLIFT MCHW User Manual preview
MCHW
Brand: KAPTARLIFT Pages: 16
Notifier AUTOPULSE IQ-318 Manual preview
AUTOPULSE IQ-318
Brand: Notifier Pages: 62
micro-trak Calc-An-Acre II Reference Manual preview
Calc-An-Acre II
Brand: micro-trak Pages: 30
TradeQuip 2103T Owner'S Manual preview
2103T
Brand: TradeQuip Pages: 7
National Instruments SCXI SCXI-1102 Calibration Procedure preview
SCXI SCXI-1102
Brand: National Instruments Pages: 18
HEEVE FLEX H0067 Instruction Manual preview
FLEX H0067
Brand: HEEVE Pages: 8
Zodiac iAqualink IQ904-P Quick Start Manual preview
iAqualink IQ904-P
Brand: Zodiac Pages: 2
Woodward 2301E-HT Product Manual preview
2301E-HT
Brand: Woodward Pages: 84
WALTCO GTSL Tech Manual preview
GTSL
Brand: WALTCO Pages: 39
MPMan DAB320 (German) Manual preview
DAB320
Brand: MPMan Pages: 32
deconta C 30 L Instruction Manual preview
C 30 L
Brand: deconta Pages: 12
Hailo TOPlift L+ Operating Instructions Manual preview
TOPlift L+
Brand: Hailo Pages: 104
Aiphone GF-1MDK Comparison Chart preview
GF-1MDK
Brand: Aiphone Pages: 1
Crosby Clamp-Co F-5 User Manual preview
Clamp-Co F-5
Brand: Crosby Pages: 8
2easy DMR21/D32/F1 Technical Manual preview
DMR21/D32/F1
Brand: 2easy Pages: 21
auto maskin Marine Pro RIO 216 Quick Installation Manual preview
Marine Pro RIO 216
Brand: auto maskin Pages: 11

Brands by name

Popular brands

Load more brands