manualshive.com logo in svg

Lucent Technologies CBX 3500, Configuration Manual

Share
Download
Lucent Technologies CBX 3500 Configuration Manual Download Page 300

Beta Draft Confidential

8-2

1/19/05

ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000

Configuring ATM Over MPLS Trunks
ATMoMPLS Trunk Licensing

ATMoMPLS Trunk Licensing

If you intend to use the ATMoMPLS trunking features on CBX 3500, CBX 500, and 
GX 550 switches in your network, you will require a license key. If you do not enter a 
license key, the NMS will not enable you to create and administer ATMoMPLS 
logical ports or ATMoMPLS trunks.

After you enter a license number at the NMS, Navis EMS-CBGX enables you to 
configure ATMoMPLS trunking features up to the maximum number supported by 
your license. Navis EMS-CBGX issues a warning if you approach the maximum limit, 
enabling you to upgrade your license in advance should you expect to exceed the 
maximum number of switches in the future. 

This section contains the following topics: 

•

“How to Order an ATMoMPLS Trunking License” on page 8-2

•

“Managing License Keys With Navis EMS-CBGX” on page 8-3

•

“How the ATMoMPLS License Works” on page 8-4

How to Order an ATMoMPLS Trunking License

Before calling a Lucent Technologies representative to discuss your licensing 
requirements, please ensure that you have read this document and that you have the 
required information at hand. 

To order a license to use ATMoMPLS trunks, you will need the Host ID of the NMS 
system, and the backup/standby NMS if applicable, for each management domain in 
which you plan to use ATMoMPLS trunks. To find out the Host ID, enter 

hostid

 in a 

Terminal window and press Return. 

Summary of Contents for CBX 3500

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands