manualshive.com logo in svg

Lucent Technologies CBX 3500, Configuration Manual

The Lucent Technologies CBX 3500 is an advanced telecommunications device, offering exceptional performance and reliability. Equipped with cutting-edge specifications, this product ensures seamless connectivity. Experience its full potential by downloading the user manual for free from our website, providing you with detailed instructions for optimal utilization.

Share
Download
background image

ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000

19-1

Beta Draft Confidential

19

CUGs

This chapter describes how to develop, configure, and define closed user groups 
(CUG) in a network. A CUG is a division of all SVC network users into logically 
linked groups of users.

This chapter contains: 

•

“Configuration Overview” on page 19-1

•

“Administrative Tasks” on page 19-7

Configuration Overview

This section provides background information and examples of CUGs. 

This section contains: 

•

“About CUGs” on page 19-1

•

“About CUG Member Rules” on page 19-2

•

“Developing CUGs” on page 19-3

About CUGs

A CUG is a division of all SVC network users into logically linked groups of users. 
Members of the same CUG have particular calling privileges that members of 
different CUGs may not have. CUGs form one level of security between users of a 
network, allowing only those users who are members of the CUG to set up calls to 
each other. Information about CUG membership and rules is available throughout the 
network.

Summary of Contents for CBX 3500

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for CBX 3500

Gardi Systems STYLE User Manual preview
STYLE
Brand: Gardi Systems Pages: 6
stellar labs Slider65 Owner'S Manual preview
Slider65
Brand: stellar labs Pages: 52
ICP DAS USA I-7050D Quick Start Manual preview
I-7050D
Brand: ICP DAS USA Pages: 6
eMoMo Remo4 Quick Start Manual preview
Remo4
Brand: eMoMo Pages: 2
Commax 2GNR User Manual preview
2GNR
Brand: Commax Pages: 11
HEIDENHAIN POSITIP 880 Installation Instructions Manual preview
POSITIP 880
Brand: HEIDENHAIN Pages: 64
Farfisa AGORA Series Manual preview
AGORA Series
Brand: Farfisa Pages: 48
M-system R7C-DS4N Instruction Manual preview
R7C-DS4N
Brand: M-system Pages: 10
Stryker SwitchPoint Infinity 3 Operation And Maintenance Manual preview
SwitchPoint Infinity 3
Brand: Stryker Pages: 124
Sonifex SM-24 User Handbook Manual preview
SM-24
Brand: Sonifex Pages: 68
human care 92441 User Manual preview
92441
Brand: human care Pages: 24
urmet domus 1060/21 Installation And Use Booklet preview
1060/21
Brand: urmet domus Pages: 32
Steren BOC-2100 User Manual preview
BOC-2100
Brand: Steren Pages: 12
BACKSAFE 16810020 Operating Instructions & Parts Manual preview
16810020
Brand: BACKSAFE Pages: 27
Curtis Instruments 1351 Manual preview
1351
Brand: Curtis Instruments Pages: 144
Power Dynamics PA203 Instruction Manual preview
PA203
Brand: Power Dynamics Pages: 16
Raven SCS 660 Installation & Service Manual preview
SCS 660
Brand: Raven Pages: 60
Kenwood XD-828 Instruction Manual preview
XD-828
Brand: Kenwood Pages: 40

Brands by name

Popular brands

Load more brands