manualshive.com logo in svg

Lucent Technologies CBX 3500, Configuration Manual

Share
Download
Lucent Technologies CBX 3500 Configuration Manual Download Page 468

Beta Draft Confidential

10-54

1/19/05

ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000

Configuring ATM PVCs
Configuring Frame Relay-to-ATM Interworking Circuits

Traffic Type Attributes

Select the Traffic Type tab in the Add PVC dialog box to specify TD settings for 
forward and reverse traffic. In the example shown in 

Figure 10-12

, configure the fields 

beneath Forward (Endpoint 1 –> Endpoint 2); then configure the fields beneath 
Reverse (Endpoint 2 –> Endpoint 1). The attributes that appear depend upon the 
endpoint type, either Frame Relay or ATM.

Figure 10-12.

Add PVC: Traffic Type Tab (FR-ATM)

Note  – You must configure Traffic Type attributes before choosing OK in the Add 
PVC dialog box to save the circuit configuration. Otherwise, the default values for 
CIR, Bc, and Be will generate an error message.

Summary of Contents for CBX 3500

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands