manualshive.com logo in svg

Lucent Technologies CBX 3500, Configuration Manual

The Lucent Technologies CBX 3500 is an advanced telecommunications device, offering exceptional performance and reliability. Equipped with cutting-edge specifications, this product ensures seamless connectivity. Experience its full potential by downloading the user manual for free from our website, providing you with detailed instructions for optimal utilization.

Share
Download
background image

ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000

1/19/05

iii

Beta Draft Confidential

LUCENT TECHNOLOGIES END-USER LICENSE AGREEMENT

LUCENT TECHNOLOGIES IS WILLING TO LICENSE THE ENCLOSED SOFTWARE 
AND ACCOMPANYING USER DOCUMENTATION (COLLECTIVELY, THE 
“PROGRAM”) TO YOU ONLY UPON THE CONDITION THAT YOU ACCEPT ALL OF 
THE TERMS AND CONDITIONS OF THIS LICENSE AGREEMENT. PLEASE READ 
THE TERMS AND CONDITIONS OF THIS LICENSE AGREEMENT CAREFULLY 
BEFORE OPENING THE PACKAGE(S) OR USING THE LUCENT SWITCH(ES) 
CONTAINING THE SOFTWARE, AND BEFORE USING THE ACCOMPANYING USER 
DOCUMENTATION. OPENING THE PACKAGE(S) OR USING THE LUCENT 
SWITCH(ES) CONTAINING THE PROGRAM WILL INDICATE YOUR ACCEPTANCE 
OF THE TERMS OF THIS LICENSE AGREEMENT. IF YOU ARE NOT WILLING TO BE 
BOUND BY THE TERMS OF THIS LICENSE AGREEMENT, LUCENT IS UNWILLING 
TO LICENSE THE PROGRAM TO YOU, IN WHICH EVENT YOU SHOULD RETURN 
THE PROGRAM WITHIN TEN (10) DAYS FROM SHIPMENT TO THE PLACE FROM 
WHICH IT WAS ACQUIRED, AND YOUR LICENSE FEE WILL BE REFUNDED. THIS 
LICENSE AGREEMENT REPRESENTS THE ENTIRE AGREEMENT CONCERNING 
THE PROGRAM BETWEEN YOU AND LUCENT, AND IT SUPERSEDES ANY PRIOR 
PROPOSAL, REPRESENTATION OR UNDERSTANDING BETWEEN THE PARTIES.

1. License Grant. 

Lucent hereby grants to you, and you accept, a non-exclusive, 

non-transferable license to use the computer software, including all patches, error 
corrections, updates and revisions thereto in machine-readable, object code form only 
(the “Software”), and the accompanying User Documentation, only as authorized in 
this License Agreement. The Software may be used only on a single computer owned, 
leased, or otherwise controlled by you; or in the event of inoperability of that 
computer, on a backup computer selected by you. You agree that you will not pledge, 
lease, rent, or share your rights under this License Agreement, and that you will not, 
without Lucent’s prior written consent, assign or transfer your rights hereunder. You 
agree that you may not modify, reverse assemble, reverse compile, or otherwise 
translate the Software or permit a third party to do so. You may make one copy of the 
Software and User Documentation for backup purposes. Any such copies of the 
Software or the User Documentation shall include Lucent’s copyright and other 
proprietary notices. Except as authorized under this paragraph, no copies of the 
Program or any portions thereof may be made by you or any person under your 
authority or control.

2. Lucent’s Rights. 

You agree that the Software and the User Documentation are 

proprietary, confidential products of Lucent or Lucent's licensor protected under US 
copyright law and you will use your best efforts to maintain their confidentiality. You 
further acknowledge and agree that all right, title and interest in and to the Program, 
including associated intellectual property rights, are and shall remain with Lucent or 
Lucent's licensor. This License Agreement does not convey to you an interest in or to 
the Program, but only a limited right of use revocable in accordance with the terms of 
this License Agreement.

Summary of Contents for CBX 3500

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for CBX 3500

M&S Systems FINISH-OUT MC111M Installation Instructions preview
FINISH-OUT MC111M
Brand: M&S Systems Pages: 2
Panasonic VL-SV70 Installation Manual preview
VL-SV70
Brand: Panasonic Pages: 16
Watts LF919 Installation Instructions Manual preview
LF919
Brand: Watts Pages: 12
Magnavox FW 560C Owner'S Manual preview
FW 560C
Brand: Magnavox Pages: 78
FAIE 12460 Manual preview
12460
Brand: FAIE Pages: 5
Keurig Vue V1255 Quick Start Manual preview
Vue V1255
Brand: Keurig Pages: 2
Elkay EZH2O LZWS-LRPBM28K Installation Instructions preview
EZH2O LZWS-LRPBM28K
Brand: Elkay Pages: 4
TransTel Communications DK-ACP60P Quick Manual Manual preview
DK-ACP60P
Brand: TransTel Communications Pages: 4
Commax CDV-70A User Manual preview
CDV-70A
Brand: Commax Pages: 8
Napa 791-1142 Owner'S Manual preview
791-1142
Brand: Napa Pages: 15
ICP DAS USA I-7050D Quick Start Manual preview
I-7050D
Brand: ICP DAS USA Pages: 6
eMoMo Remo4 Quick Start Manual preview
Remo4
Brand: eMoMo Pages: 2
Vega Q700 Owner'S Manual preview
Q700
Brand: Vega Pages: 16
iDTRONIC BLUEBOX ADVANT UHF Manual preview
BLUEBOX ADVANT UHF
Brand: iDTRONIC Pages: 54
B&B Molders Nautilus P1 Installation Instructions & Owner'S Manual preview
Nautilus P1
Brand: B&B Molders Pages: 18
HIKVISION DS-KH9510-WTE1 User Manual preview
DS-KH9510-WTE1
Brand: HIKVISION Pages: 23
Hunter I-20 ULTRA Manual preview
I-20 ULTRA
Brand: Hunter Pages: 2
FXConnectX STAGEPRO-8 User Manual preview
STAGEPRO-8
Brand: FXConnectX Pages: 14

Brands by name

Popular brands

Load more brands