Lucent Technologies CBX 3500, Configuration Manual

Page: 506 / 888

Beta Draft Confidential
10-92 1/19/05 ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000
Configuring ATM PVCs
Using Templates to Define Circuits
Using Templates to Define Circuits
If you have previously defined a PVC configuration and saved it as a template (using
the Is Template field), you can create a new PVC using the same parameters. These
steps also apply to Offnet circuits and Redirect PVCs, but you would choose the
Offnet Circuits or Redirect PVCs class node in step 2 below.
To create a new PVC from a template:
1. In the Switch tab, expand the Circuits node.
2. Expand the PVCs node and select a PVC.
3. Select a PVC from the list of PVCs.
4. Right-click on the PVC instance node, and select Add PVC using this Template
from the pop-up menu, as shown in Figure 10-32 . This menu option will display
only if the Is Template box is checked in the Administrative tab for the PVC.
Figure 10-32. Adding a PVC Based on a Template
The Add PVC dialog box ( Figure 10-3 on page 10-13 ) appears, with the same
values as the selected template PVC, except for Name, Alias, and other values that
are required to be unique.
5. Select each of the tabs and modify the fields in each tab, if necessary. Choose the
Help button for descriptions of the fields and buttons in each tab.
6. Choose OK to provision the PVC and close the Add PVC dialog box.
Deleting Circuits
To delete a circuit:
1. In the Switch tab, expand the Circuits class node.
2. Expand the PVCs class node and select the circuit you want to delete.
3. Right-click on the circuit node and select Delete from the pop-up menu.
4. Choose Yes to confirm the deletion.