manualshive.com logo in svg

Lucent Technologies CBX 3500, Configuration Manual

The Lucent Technologies CBX 3500 is an advanced telecommunications device, offering exceptional performance and reliability. Equipped with cutting-edge specifications, this product ensures seamless connectivity. Experience its full potential by downloading the user manual for free from our website, providing you with detailed instructions for optimal utilization.

Share
Download
background image

Beta Draft Confidential

Configuring Management Paths

Using MPVCs

ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000

1/19/05

11-7

Defining a Redirect MPVC Connection

1. Open the object tree for a switch.

2. In the Network object tree, expand the instance node for the network that contains 

the switch (see 

Figure 3-4 on page 3-5

).

3. Expand the LPorts class node and expand the instance node for the management 

logical port named “

MgmtLPort.SW<

switchname>

” for Endpoint 1. The 

<switchname>

 should correspond to the name of the switch on which the 

management port endpoint resides. The LPort Type field should display 
Others:Multi Hop MPVC.

4. Expand the Circuits class node.

5. Select the Redirect PVCs class node and perform one of the following:

•

Select Add from the Actions menu.

•

Choose the Add button from the toolbar.

•

Right-click the Redirect PVCs class node and select Add from the pop-up 
menu.

The Add PVC dialog box appears (

Figure 11-2 on page 11-5

).

6. Enter the VPI/VCI or DLCI values as follows:

•

For an ATM UNI endpoint, enter a VPI and VCI value. See 

“About the PVC 

Tabs” on page 10-16

 for descriptions of these fields

•

For a Frame Relay UNI endpoint, enter a DLCI value. See 

page 10-67

 for a 

description of this field.

7. Enter a Circuit Name for the redirect MPVC. You will select this name when you 

configure the NMS path.

8. Set the remaining PVC attributes as shown in 

Table 11-2

.

Table 11-2.

Configuring Redirect MPVC Attributes

For an ATM Service PVC see...

For an Interworking PVC see...

Table 10-3 on page 10-17

 to set the 

Administrative Attributes

Table 10-11 on page 10-49

 to set the 

Administrative Attributes

Table 10-4 on page 10-23

 to set the 

Traffic Type Attributes

Table 10-12 on page 10-55

 to set the 

Traffic Type Attributes

Table 10-5 on page 10-27

 to set the 

User Preference Attributes

Table 10-13 on page 10-61

 to set the 

User Preference Attributes

Table 10-6 on page 10-32

 to set the 

Traffic Mgmt. Attributes

Summary of Contents for CBX 3500

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for CBX 3500

DAB S4 Instruction Manual preview
S4
Brand: DAB Pages: 8
La Gard 3125 User Operating Instructions preview
3125
Brand: La Gard Pages: 2
Jensen JBS-350 Wall Mount Instructions preview
JBS-350
Brand: Jensen Pages: 2
M&S Systems dmc3-4 Installation Instructions Manual preview
dmc3-4
Brand: M&S Systems Pages: 24
V-Tec DT37MG User Manual preview
DT37MG
Brand: V-Tec Pages: 16
AeroAudio MOS - UNO - IP Manual preview
MOS - UNO - IP
Brand: AeroAudio Pages: 8
BendPak 5175403 Service Manual preview
5175403
Brand: BendPak Pages: 43
heat-timer Mini-MOD Installation And Operation Instruction Manual preview
Mini-MOD
Brand: heat-timer Pages: 36
Carrier AQUASNAP 30RA "B" Operation & Maintenance Instructions Manual preview
AQUASNAP 30RA "B"
Brand: Carrier Pages: 36
Estun E21S Installation Manual preview
E21S
Brand: Estun Pages: 41
XtendLan DPC-D248-R User Manual preview
DPC-D248-R
Brand: XtendLan Pages: 14
CarlStahl RZ150 User Information preview
RZ150
Brand: CarlStahl Pages: 28
Contec AO-1604LX-USB User Manual preview
AO-1604LX-USB
Brand: Contec Pages: 67
Haklift TUNKKI100P Original Instructions Manual preview
TUNKKI100P
Brand: Haklift Pages: 25
suntouch D12 series Installation Manual preview
D12 series
Brand: suntouch Pages: 20
Fun Generation Satmix 2.1 PA system User Manual preview
Satmix 2.1 PA system
Brand: Fun Generation Pages: 32
HADEF 28/12-EX Installation, Operating And Maintenance Instructions preview
28/12-EX
Brand: HADEF Pages: 23
Taco Hot-LinkPlus Instruction Sheet preview
Hot-LinkPlus
Brand: Taco Pages: 4

Brands by name

Popular brands

Load more brands