Chapter 1 Safety
Chapter 1 Safety
1.1 Safety Regulation
The SLC-M+ series uses a CO
product by
CDRH (the Center for Devices and Radiological Health)
Wavelength : 9.3~10.6µm
Maximum output power :
Visibility : Invisible
When operating the
with the safety regulations as following:
Do not attempt to modify or disassemble any component of the machine without
LTT technical support
Do not open the doors of chassis and
components
Connect the machine to a grounded outlet. Verify that the voltage of the outlet
is correct for the machine.
Do not disable the interlocks which are on top and front doors.
Be careful about the path of t
eye or skin injury may result.
4
Chapter 1 Safety
Regulation
series uses a CO
2
Laser as a light source. It is classified as a class
CDRH (the Center for Devices and Radiological Health)
Wavelength : 9.3~10.6µm
Maximum output power : 17 ~ 100W
Visibility : Invisible
When operating the SLC-M+ series, be sure to always comply
with the safety regulations as following:
Do not attempt to modify or disassemble any component of the machine without
technical support.
Do not open the doors of chassis and access the laser tube or electronic
components, especially while the machine power is on.
Connect the machine to a grounded outlet. Verify that the voltage of the outlet
is correct for the machine.
Do not disable the interlocks which are on top and front doors.
Be careful about the path of the invisible laser beam shown in figure.
eye or skin injury may result.
Laser as a light source. It is classified as a class-IIIR
CDRH (the Center for Devices and Radiological Health)
.
series, be sure to always comply
Do not attempt to modify or disassemble any component of the machine without
access the laser tube or electronic
, especially while the machine power is on.
Connect the machine to a grounded outlet. Verify that the voltage of the outlet
Do not disable the interlocks which are on top and front doors.
he invisible laser beam shown in figure. Otherwise,
