Chapter 3 Operation
7.Moving: You can moving
middle blank.
3.7.5 Communication Setting
Communication Setting is setup the communication port of RS232. Before change
this setting, you need enter the password and click
only change the port. If change other settings, the connection between PC and
machine may not b
permission to change the setting.
Language Selection
you need enter the password and click
Choose the COM port that connected PC and machine (
correctly
). Make sure that the parameters in computer’s COM Port are the same as in
AutoCCD.
95
moving the carriage toward four directions by the distance in the
3.7.5 Communication Setting
Communication Setting is setup the communication port of RS232. Before change
this setting, you need enter the password and click
[OK]
to allow changing. Please
only change the port. If change other settings, the connection between PC and
machine may not be made. The [Disable] button can disable other one without
permission to change the setting.
Language Selection
: User can change the language. Before change this setting,
you need enter the password and click
[OK]
to allow changing.
COM port that connected PC and machine (
the COM port should be
). Make sure that the parameters in computer’s COM Port are the same as in
by the distance in the
Communication Setting is setup the communication port of RS232. Before change
to allow changing. Please
only change the port. If change other settings, the connection between PC and
e made. The [Disable] button can disable other one without
Before change this setting,
to allow changing.
the COM port should be identified
). Make sure that the parameters in computer’s COM Port are the same as in
