Chapter 3 Operation
80
Put a A4 paper at the center of the working area. Make sure the paper will not be
moved during the whole calibration.
Turn on the laser power key.
Press the
Connect
button and let the AutoCCD connects with CCD.
Please DO NOT select the [online] function to avoid the error while calibration.
Go to
AutoCCD / File / Open Job
. Open
[Calibration_Circle_200.job]
Go to
AutoCCD / CCD Setting
tab. Key in the Password with [
LTT
]
6. Do the [Pixel to MM] calibration.
Press
[Pixel to MM]
button.
The AutoCCD will automatically send a
P2MM.prn
file to the machine and then
marks two circle on the A4 paper.
AutoCCD will automatically move the CCD to get the image, then calculate the pixel
to millimeter transform constant.
Finally you will see the number of
[1 Pixel= mm]
will be updated by AutoCCD.
You can do it again. Please don’t move the marked paper, and turn the laser power
key off. Then press
[Pixel to MM]
button again. It will do the above processes all
over again.
7. Do the [Auto Calibration] calibration.
