Chapter 3 Operation
68
3.4 Print Driver Operation
Because SLC-M+ is controlled by a standard Windows printer driver, you can create
the drawing on your favorite graphics software based on Windows system. When you
want to send files to SLC-M+, you can easy modify the driver settings just like using
a desktop printer. There are four tabs in SLC-M+ driver programming:
Laser
,
Job
,
Page
,
and
Power scale
.
3.4.1 Laser Tab
The
[Laser]
tab contains Power, Speed, and PPI for eight colors. Other functions
enable
user to save and load configuration files of driver settings, check driver
information, tun e machin e, and customize the language of
driver.
Color
SLC-M+ system can cut with eight groups of power, speed and PPI according to the
color in drawing. If the color in drawing does not belong any one of these eight colors, then
driver will choose a similar one according to its RGB values.
Power
This item can control the output power by setting the percentage of maximum power.
For example, if the maximum power of Laser generator is 30 Watts, then setting 50%
power will generate about 15 Watts of output power.
