Chapter 3 Operation
94
3. Do the [Auto Calibration] calibration.
Press [Auto calibration] button.
The SLC-M+ will automatically send a Shift.prn file to the machine and then marks a circle
on the A4 paper.
AutoCCD will automatically move the CCD and get the image, then calculate the shift
parameters constant.
Finally you will see the number of [CCD Shift] will be updated by AutoCCD.
You can do it again. Please don’t move the marked paper, and turn the laser power key off.
Then press [Auto calibration] button again. It will do the above processes all over again.
3.7.4.2 Position Test
This function is to use for finding star position and moving carriage.
1.Go To: Set up the position to move
2. Current Position: Show the present coordinate of the carriage.
3. Go To Position: Move the carriage to the position which is setting in #1
4. Go To Position 2: Move the carriage to the position 2 which calculates from
#1 and
two point setting.
5. Homing: Move the carriage to home and reset the position of home
if the
carriage
loses its position.
6. Set as Start Point: After finding the start position, you can set the coordinate in #1 to
be the start point by click this button.
2
3
6
7
5
4
1
