LMI Technologies Gocator 2100 Series User Manual Download Page 321

Page: 321 / 523

Gocator Line Profile Sensors - User Manual

Gocator Device Files • Job Files • 321

SurfaceHole

A SurfaceHole element defines settings for a surface hole tool and one or more of its measurements.

Element

Type

Description

Name

String

Tool name.

Source

32s

Surface source.

Anchor\X

String (CSV)

The X measurements (IDs) used for anchoring.

Anchor\X.options

String (CSV)

The X measurements (IDs) available for anchoring.

Anchor\Y

String (CSV)

The Y measurements (IDs) used for anchoring.

Anchor\Y.options

String (CSV)

The Y measurements (IDs) available for anchoring.

Anchor\Z

String (CSV)

The Z measurements (IDs) used for anchoring.

Anchor\Z.options

String (CSV)

The Z measurements (IDs) available for anchoring.

StreamOptions

Collection

A collection of

StreamOption

on page 291 elements.

Stream\Step

32s

The stream source step. Possible values are:

1 – Video

2 – Range

3 – Surface

4 – Section

Stream\Id

32u

The stream source ID.

NominalRadius

64f

Nominal radius (mm).

RadiusTolerance

64f

Radius tolerance (mm).

PartialDetectionEnabled

Boolean

Setting to enable/disable partial detection:

0 – Disable

1 – Enable

DepthLimitEnabled

Boolean

Setting to enable/disable depth limit:

0 – Disable

1 – Enable

DepthLimit

64f

The depth limit relative to the surface. Data below this limit

is ignored.

RegionEnabled

Boolean

Setting to enable/disable region:

0 – Disable

1 – Enable

Region

Region3D

Measurement region.

RefRegionsEnabled

Boolean

Setting to enable/disable reference regions:

0 – Disable

1 – Enable

RefRegionCount

32s

Count of the reference regions that are to be used.

SurfaceHole Child Elements

Summary of Contents for Gocator 2100 Series












































































































































































































































































































































































































































































































































Search results

Summary of Contents for Gocator 2100 Series

Reviews:

Related manuals for Gocator 2100 Series

Brands by name

Popular brands

LMI Technologies Gocator 2100 Series, User Manual

Search results

Summary of Contents for Gocator 2100 Series

Reviews:

Related manuals for Gocator 2100 Series

Brands by name

Popular brands