LMI Technologies Gocator 2100 Series User Manual Download Page 232

Page: 232 / 523

Gocator Line Profile Sensors - User Manual

Gocator Web Interface • Measurement • 232

Function

Description

decision - decision value output by the script. Can only be 0 or 1

void Output_SetAt(unsigned int index,

double value, int decision)

Sets the output value and decision at the specified output index. To

output an invalid value, the constant INVALID_VALUE can be used (e.g.,

Output_SetAt(0, INVALID_VALUE, 0))

Parameters:

index – Script output index

value – value output by the script

decision – decision value output by the script. Can only be 0 or 1

void Output_SetId(int id, double value, int

decision)

Sets the output value and decision at the specified script output ID. To

output an invalid value, the constant INVALID_VALUE can be used (e.g.,

Output_SetId(0, INVALID_VALUE, 0))

Parameters:

id – Script output ID

Function

Description

void Memory_Set64s (int id, long long

value)

Stores a 64-bit signed integer in persistent memory.

Parameters:

id - ID of the value

value - Value to store

long long Memory_Get64s (int id)

Loads a 64-bit signed integer from persistent memory.

Parameters:

id - ID of the value

Returns:

value - Value stored in persistent memory

void Memory_Set64u (int id, unsigned long

long value)

Stores a 64-bit unsigned integer in the persistent memory

Parameters:

id - ID of the value

value - Value to store

unsigned long long Memory_Get64u (int id) Loads a 64-bit unsigned integer from persistent memory.

Parameters:

id - ID of the value

Returns:

value - Value stored in persistent memory

void Memory_Set64f (int id, double value)

Stores a 64-bit double into persistent memory.

Parameters:

id - ID of the value

value - Value to store

Memory Functions

Summary of Contents for Gocator 2100 Series












































































































































































































































































































































































































































































































































Search results

Summary of Contents for Gocator 2100 Series

Reviews:

Related manuals for Gocator 2100 Series

Brands by name

Popular brands

LMI Technologies Gocator 2100 Series, User Manual

Search results

Summary of Contents for Gocator 2100 Series

Reviews:

Related manuals for Gocator 2100 Series

Brands by name

Popular brands