LMI Technologies Gocator 2100 Series User Manual Download Page 259

Page: 259 / 523

Gocator Line Profile Sensors - User Manual

Gocator Emulator • Working with Jobs and Data • 259

Do one of the following:

Click

Discard

to discard any unsaved changes.

Click

Cancel

to return to the main window to save your changes.

If you clicked

Discard

, navigate to the replay data to upload from the client computer and click

The replay data is loaded, and a new unsaved, untitled job is created.

Replay data can be exported using the CSV format. If you have enabled

Acquire Intensity

in the

Scan

Mode

panel on the

Scan

page, the exported CSV file includes intensity data.

Surface

intensity data cannot be exported to the CSV format. It can only be

exported separately

as a bitmap

To export replay data in the CSV format:

Click the Export button

and select

Export Range Data as CSV

In Profile mode, all data in the record buffer is exported. In Surface mode, only data at the current
replay location is exported.

Use the playback control buttons to move to a different replay location; for information on playback,
see

To replay data

Playback and Measurement Simulation

on page 256.

Optionally, convert exported data to another format using the CSV Converter Tool. For information on
this tool, see

CSV Converter Tool

on page 454.

The decision values in the exported data depend on the

current

state of the job, not the state

during recording. For example, if you record data when a measurment returns a

pass

decision,

change the measurement's settings so that a

fail

decision is returned, and then export to CSV,

you will see a

fail

decision in the exported data.

Recorded intensity data can be exported to a bitmap (.BMP format).

Acquire Intensity

must be

checked in the

Scan Mode

panel while data was being recorded in order to export intensity data.

Summary of Contents for Gocator 2100 Series












































































































































































































































































































































































































































































































































Search results

Summary of Contents for Gocator 2100 Series

Reviews:

Related manuals for Gocator 2100 Series

Brands by name

Popular brands

LMI Technologies Gocator 2100 Series, User Manual

Search results

Summary of Contents for Gocator 2100 Series

Reviews:

Related manuals for Gocator 2100 Series

Brands by name

Popular brands