LMI Technologies Gocator 2100 Series User Manual Download Page 426

Page: 426 / 523

Gocator Line Profile Sensors - User Manual

• 426

All objects that are explicitly created by the user or passed via callbacks should be destroyed
by using the

GoDestroy

function.

GoSensor

GoSensor

represents a physical sensor. If the physical sensor is the Main sensor in a dual-sensor setup, it

can be used to configure settings that are common to both sensors.

GoSetup

The

GoSetup

class represents a device's configuration. The class provides functions to get or set all of the

settings available in the Gocator web interface.

GoSetup

is included inside

GoSensor

. It encapsulates scanning parameters, such as exposure, resolution,

spacing interval, etc. For parameters that are independently controlled for Main and Buddy sensors,
functions accept a role parameter.

GoLayout

The

GoLayout

class represents layout-related sensor configuration.

GoTools

The

GoTools

class is the base class of the measurement tools. The class provides functions for getting

and setting names, retrieving measurement counts, etc.

GoTransform

The

GoTransform

class represents a sensor transformation and provides functions to get and set

transformation information, as well as encoder-related information.

GoOutput

The

GoOutput

class represents output configuration and provides functions to get the specific types of

output (Analog, Digital, Ethernet, and Serial). Classes corresponding to the specific types of output
(

GoAnalog

GoDigital

GoEthernet

, and

GoSerial

) are available to configure these outputs.

Data Types

The following sections describe the types used by the SDK and the kApi library.

Value Types

GoSDK

is built on a set of basic data structures, utilities, and functions, which are contained in the

kApi

library.

The following basic value types are used by the

kApi

library.

Type

Description

k8u

8-bit unsigned integer

k16u

16-bit unsigned integer

Value Data Types

Summary of Contents for Gocator 2100 Series












































































































































































































































































































































































































































































































































Search results

Summary of Contents for Gocator 2100 Series

Reviews:

Related manuals for Gocator 2100 Series

Brands by name

Popular brands

LMI Technologies Gocator 2100 Series, User Manual

Search results

Summary of Contents for Gocator 2100 Series

Reviews:

Related manuals for Gocator 2100 Series

Brands by name

Popular brands