LMI Technologies Gocator 2100 Series User Manual Download Page 268

Page: 268 / 523

Gocator Line Profile Sensors - User Manual

Gocator Accelerator • Limitations • 268

printf("Error: GoAccelerator_Attach:%d\n", status);

return;

}

// create connection to GoSensor object

if ((status = GoSensor_Connect(sensor)) != kOK)

{

printf("Error: GoSensor_Connect:%d\n", status);

return;

}

After, the SDK application is the same as controlling and acquiring data from a standalone sensor.

Limitations

The Gocator Accelerator currently has the following limitations:

1. Digital, Serial and Analog I/Os are not supported.

2. Accelerator application must run on the same PC as the web browser.

3. Only one instance of the Gocator Accelerator can run at a time. Note that one instance can accelerate

one standalone sensor or a dual-sensor pair.

These limitations will be removed in future releases.

Summary of Contents for Gocator 2100 Series












































































































































































































































































































































































































































































































































Search results

Summary of Contents for Gocator 2100 Series

Reviews:

Related manuals for Gocator 2100 Series

Brands by name

Popular brands

LMI Technologies Gocator 2100 Series, User Manual

Search results

Summary of Contents for Gocator 2100 Series

Reviews:

Related manuals for Gocator 2100 Series

Brands by name

Popular brands