LMI Technologies Gocator 2100 Series User Manual Download Page 152 | Manualshive

Page: 152 / 523

background image

Gocator Line Profile Sensors - User Manual

Gocator Web Interface • Measurement • 152

2.

Choose Profile or Surface mode in the

Scan Mode

panel.

If one of these modes is not selected, tools will not be available in the

Measure

panel.

3.

Go to the

Measure

page by clicking on the

Measure

icon.

4.

In the Tools panel, select the tool you want to add from the drop-down list of tools.

5.

Click on the

Add

button in the Tools panel.

The tool and its available measurements are added to the tool list. The tool parameters are listed in the
area below the tool list.

6.

(Optional)

If you are running a dual-sensor system, choose the sensor that will provide data to the

measurement tool in

Source

.

For more information on sources, see

7.

(Optional)

If the measurement is a profile measurement running on a section, and you have created

more than one section, choose the section that will provide data to the measurement in

Stream

.

For more information on streams, see

Streams (Sections)

on the next page.

8.

Select a measurement at the bottom of the tool panel.

9.

Set any tool- or measurement-specific settings.

For tool- and measurement-specific settings, see the topics for the individual

or

tools.

10. Set the

Min

and

Max

decision values.

For more information on decisions, see

11.

(Optional)

Set one or more filters.

For more information on filters, see

12.

(Optional)

Set up anchoring.

For more information on anchoring, see

Measurement Anchoring

If the drop-down list contains only the Distance measurement, the sensor is not equipped with
profile tools. The Distance measurement is provided in all sensors to demonstrate the
measurement capability.

Source

For dual-sensor systems, you must specify a profile source for measurement tools. The source
determines which sensor provides data for the measurement. The same source is used for all of a tool's
measurements.

Depending on the layout you have selected, the

Source

drop-down will display one of the following (or a

combination). For more information on layouts, see

System Layout

The

Source

setting applies to all of a tool's measurements.

Setting

Description

Top

Refers to the Main sensor in a standalone or dual-sensor system, the Main sensor in

Opposite layout, or the combined data from both Main and Buddy sensors.

«
...
150
151
152
153
154
...
»

Summary of Contents for Gocator 2100 Series












































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Gocator 2100 Series

Brand: Banner Pages: 2

Brand: Hama Pages: 2

Brand: Bachmann Pages: 2

Brand: Barco Pages: 25

Brand: Barco Pages: 16

Brand: ICC Pages: 32

Brand: Manfrotto Pages: 2

Brand: LAUMAS Pages: 44

Brand: Nautronic Pages: 7

Brand: NAPCO Pages: 16

Brand: Saab Pages: 10

AERASGARD RCO2-W

Brand: S+S Regeltechnik Pages: 7

FRONT HEADLIGHT LENS COVER

Brand: Bimmer Jakes Pages: 4

V2 SUPERCHARGER

Brand: Tesla Pages: 9

Brand: Haibang Pages: 6

Brand: Growatt Pages: 10

Brand: Bioenno Power Pages: 2

Brand: Lafferty Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands