LMI Technologies Gocator 2100 Series User Manual Download Page 258

Page: 258 / 523

Gocator Line Profile Sensors - User Manual

Gocator Emulator • Working with Jobs and Data • 258

To clear replay data:

Click the

Clear Replay Data

button

Downloading, Uploading, and Exporting Replay Data

Replay data (recorded scan data) can be downloaded from the emulator to a client computer, or
uploaded from a client computer to the emulator.

Data can also be exported from the emulator to a client computer in order to process the data using
third-party tools.

You can only upload replay data to the same sensor model that was used to create the data.

Replay data is not loaded or saved when you load or save jobs.

To download replay data:

Click the Download button

In the

File Download

dialog, click

Save

In the

Save As...

dialog, choose a location, optionally change the name (keeping the .rec extension), and click

Save

To upload replay data:

Click the Upload button

The Upload menu appears.

In the Upload menu, choose one of the following:

Upload

: Unloads the current job and creates a new unsaved and untitled job from the content of the

replay data file.

Upload and merge

: Uploads the replay data and merges the data's associated job with the current

job. Specifically, the settings on the

Scan

page are overwritten, but all other settings of the current

job are preserved, including any measurements or models.

If you have unsaved changes in the current job, the firmware asks whether you want to discard the
changes.

Summary of Contents for Gocator 2100 Series












































































































































































































































































































































































































































































































































Search results

Summary of Contents for Gocator 2100 Series

Reviews:

Related manuals for Gocator 2100 Series

Brands by name

Popular brands

LMI Technologies Gocator 2100 Series, User Manual

Search results

Summary of Contents for Gocator 2100 Series

Reviews:

Related manuals for Gocator 2100 Series

Brands by name

Popular brands