LMI Technologies Gocator 2100 Series User Manual Download Page 189

Page: 189 / 523

Gocator Line Profile Sensors - User Manual

Gocator Web Interface • Measurement • 189

Parameter

Description

Location

(Strip Height, Strip X, and

Strip Z measurements only)

Specifies the strip position from which the measurements are performed.

Left

- Left edge of the strip.

Right

- Right edge of the strip.

Center

- Center of the strip.

Left Edge

Right Edge

Specifies the features that will be considered as the strip's left and right edges. You can select

more than one condition.

Rising

- Rising edge detected based on the strip edge parameters.

Falling

- Falling edge detected based on the strip edge parameters.

Data end

- First valid profile data point in the measurement region.

Void

- Gap in the data that is larger than the maximum void threshold. Gaps connected to the

measurement region's boundary are not considered as a void.

See "Strip Start and Terminate Conditions" in the

Gocator Measurement Tool Technical Manual

for

the definitions of these conditions.

Select Type

Specifies how a strip is selected when there are multiple strips within the measurement area.

Best

- The widest strip.

Index Left

- 0-based strip index, counting from left to right.

Index Right

- 0-based strip index, counting from right to left.

Index

0-based strip index.

Min Height

Specifies the minimum deviation from the strip base. See "Strip Step Edge Definitions" in the

Gocator Measurement Tool Technical Manual

on how this parameter is used for different base

types.

Support Width

Specifies the width of the region around the edges from which the data is used to calculate the

step change. See "Strip Step Edge Definitions" in the

Gocator Measurement Tool Technical Manual

on how this parameter is used by different base types.

Transition Width

Specifies the nominal width needed to make the transition from the base to the strip. See

"Strip Step Edge Definitions" in the

Gocator Measurement Tool Technical Manual

on how this

parameter is used by different base types.

Max Void Width

The maximum width of missing data allowed for the data to be considered as part of a strip

when

Void

is selected in the

Left

Right

parameter. This value must be smaller than the edge

Support Width

When occlusion and exposure causes data drops, users should use the gap filling function to

fill the gaps. See

Gap Filling

on page 105 for information.

Summary of Contents for Gocator 2100 Series












































































































































































































































































































































































































































































































































Search results

Summary of Contents for Gocator 2100 Series

Reviews:

Related manuals for Gocator 2100 Series

Brands by name

Popular brands

LMI Technologies Gocator 2100 Series, User Manual

Search results

Summary of Contents for Gocator 2100 Series

Reviews:

Related manuals for Gocator 2100 Series

Brands by name

Popular brands