LMI Technologies Gocator 2100 Series User Manual Download Page 248

Page: 248 / 523

Gocator Line Profile Sensors - User Manual

Gocator Web Interface • Dashboard • 248

Name

Description

Laser Safety

Whether Laser Safety is enabled.

Uptime

Length of time since the sensor was power-cycled or reset.

CPU Usage

Sensor CPU utilization (%).

Current Speed*

Current speed of the sensor.

Encoder Value

Current encoder value (ticks).

Encoder Frequency

Current encoder frequency (Hz).

Memory Usage

Sensor memory utilization (MB used / MB total available).

Storage Usage

Sensor flash storage utilization (MB used / MB total available).

Ethernet Link Speed

Speed of the Ethernet link (Mbps).

Ethernet Traffic

Network output utilization (MB/sec).

Internal Temperature

Internal sensor temperature.

Processing Latency

Last delay from camera exposure to when results can be scheduled to.

Processing Latency Peak

Peak latency delay from camera exposure to when results can be scheduled to Rich

I/O. Reset on start.

Name

Description

Scan Count*

Number of scans performed since sensor state last changed to Running.

Trigger Drop**

Count of camera frames dropped due to excessive trigger speed.

Processing Drop**

Count of frame drops due to excessive CPU utilization.

Ethernet Output Drop**

Count of frame drops due to slow Ethernet link.

Analog Output Drop**

Count of analog output drops because last output has not been completed.

Serial Output Drop**

Count of serial output drops because last output has not been completed.

Digital Output 1 Drop**

Count of digital output drops because last output has not been completed.

Digital Output 2 Drop**

Count of digital output drops because last output has not been completed.

Digital Output 1 High Count

Count of high states on digital output.

Digital Output 2 High Count

Count of high states on digital output.

Digital Output 1 Low Count

Count of low states on digital output.

Digital Output 2 Low Count

Count of low states on digital output.

Anchor Invalid Count**

Count of invalid anchors.

Valid Spot Count

Count of valid spots detected in the last frame.

Max Spot Count*

Maximum number of spots detected since sensor was started.

Camera Search Count

Count of camera frame where laser has lost tracked. Only applicable when tracking

window is enabled.

Dashboard History Values

* When the sensor is accelerated, the indicator's value is reported from the accelerating PC.

Summary of Contents for Gocator 2100 Series












































































































































































































































































































































































































































































































































Search results

Summary of Contents for Gocator 2100 Series

Reviews:

Related manuals for Gocator 2100 Series

Brands by name

Popular brands

LMI Technologies Gocator 2100 Series, User Manual

Search results

Summary of Contents for Gocator 2100 Series

Reviews:

Related manuals for Gocator 2100 Series

Brands by name

Popular brands