LMI Technologies Gocator 2100 Series User Manual Download Page 489

Page: 489 / 523

Gocator Line Profile Sensors - User Manual

Specifications • Sensors • 489

Gocator 2880 Sensor

The Gocator 2880 is defined below.

MODEL

2880

Data Points / Profile

1280

Linearity Z

(+/- % of MR)

0.04

Resolution Z (mm)

0.092 - 0.488

Resolution X (mm)

0.375 - 1.1

Clearance

Distance (CD) (mm)

350

Measurement

Range (MR) (mm)

800

Field of View (FOV) (mm)

390 - 1260

Recommended Laser
Class

Dimensions (mm)

49x75x498

Weight (kg)

1.3

Scan Rate

Approx. 170Hz to 5000 Hz

Interface

Gigabit Ethernet

Inputs

Differential Encoder, Laser Safety Enable, Trigger

Outputs

2x Digital output, RS-485 Serial (115 kBaud), 1x Analog Output (4 - 20 mA)

Input Voltage (Power)

+24 to +48 VDC (13 Watts); /- 10%

Housing

Gasketed aluminum enclosure, IP67

Operating Temp.

0 to 50 °C

Storage Temp.

-30 to 70 °C

Optical models, laser classes, and packages can be customized. Contact LMI for more details.

Specifications stated are based on standard laser classes. Resolution Z and Linearity Z may vary for other
laser classes.

Mechanical dimensions, CD/FOV/MR, and the envelope for each sensor model are illustrated on the
following pages.

Summary of Contents for Gocator 2100 Series












































































































































































































































































































































































































































































































































Search results

Summary of Contents for Gocator 2100 Series

Reviews:

Related manuals for Gocator 2100 Series

Brands by name

Popular brands

LMI Technologies Gocator 2100 Series, User Manual

Search results

Summary of Contents for Gocator 2100 Series

Reviews:

Related manuals for Gocator 2100 Series

Brands by name

Popular brands