LMI Technologies Gocator 2100 Series User Manual Download Page 253

Page: 253 / 523

Gocator Line Profile Sensors - User Manual

Gocator Emulator • Running the Emulator • 253

Selecting the emulator interface language

Adding a Scenario to the Emulator

To simulate a physical sensor using a support file downloaded from a sensor, you must add it as a
scenario in the emulator.

You can add support files downloaded from any series of Gocator sensors to the emulator.

To add a scenario:

Launch the emulator if it isn't running already.

Click the

Add

button and choose a previously saved support file (.gs extension) in the

Choose File to

Upload

dialog.

(Optional)

Description

, type a description.

You can only add descriptions for user-added scenarios.

Running a Scenario

After you have added a virtual sensor by uploading a support file to the emulator, you can run it from
the

Available Scenarios

list on the emulator launch screen. You can also run any of the scenarios

included in the installation.

Summary of Contents for Gocator 2100 Series












































































































































































































































































































































































































































































































































Search results

Summary of Contents for Gocator 2100 Series

Reviews:

Related manuals for Gocator 2100 Series

Brands by name

Popular brands

LMI Technologies Gocator 2100 Series, User Manual

Search results

Summary of Contents for Gocator 2100 Series

Reviews:

Related manuals for Gocator 2100 Series

Brands by name

Popular brands