Lexus CT 200H 2016 Owner'S Manual Download

Page: 564 / 632

564

8-2. Steps to take in an emergency

CT200h_OM_OM76197U_(U)

■

Starting the hybrid system when the 12-volt battery is discharged

The hybrid system cannot be started by push-starting.

■

To prevent 12-volt battery discharge

●

Turn off the headlights and the audio system while the hybrid system is off.

●

Turn off any unnecessary electrical components when the vehicle is running at a low

speed for an extended period, such as in heavy traffic.

■

When the 12-volt battery is removed or discharged

●

The hybrid system may not start. (



P. 488)

●

If the 12-volt battery discharges while the shift position is in P, it may not be possible to

shift the shift position to other positions. In this case, the vehicle cannot be towed with-

out lifting both front wheels because the front wheels will be locked. (



P. 524)

●

When the 12-volt battery is reconnected, start the hybrid system and confirm that the

shift position can be changed to each position using the shift position indicator.

■

Charging the 12-volt battery

The electricity stored in the 12-volt battery will discharge gradually even when the vehicle

is not in use, due to natural discharge and the draining effects of certain electrical appli-

ances. If the vehicle is left for a long time, the 12-volt battery may discharge, and the

hybrid system may be unable to start. (The 12-volt battery recharges automatically while

the hybrid system is operating.)

WARNING

■

Avoiding 12-volt battery fires or explosions

Observe the following precautions to prevent accidentally igniting the flammable gas

that may be emitted from the 12-volt battery:

●

Make sure each jumper cable is connected to the correct terminal and that it is not

unintentionally in contact with any other than the intended terminal.

●

Do not allow the other end of the jumper cable connected to the “+” terminal to come

into contact with any other parts or metal surfaces in the area, such as brackets or

unpainted metal.

●

Do not allow the + and - clamps of the jumper cables to come into contact with each

other.

●

Do not smoke, use matches, cigarette lighters or allow open flame near the 12-volt

battery.

Summary of Contents for CT 200H 2016

























































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CT 200H 2016

Reviews:

Related manuals for CT 200H 2016

Brands by name

Popular brands

Lexus CT 200H 2016, Owner'S Manual

Search results

Summary of Contents for CT 200H 2016

Reviews:

Related manuals for CT 200H 2016

Brands by name

Popular brands