Lexus CT 200H 2016 Owner'S Manual Download

Page: 543 / 632

543

8-2. Steps to take in an emergency

CT200h_OM_OM76197U_(U)

When trouble

ari

ses

: Refer to the separate “Scheduled Maintenance” or “Owner’s Manual Supplement”

for the maintenance interval applicable to your vehicle.

: For the EV drive mode operating conditions (



P. 160).

(U.S.A. only)

Indicates that all maintenance according to the driven
distance on the maintenance schedule

should be per-

formed soon.

Comes on approximately 4500 miles (7200 km)

after the message has been reset.



If necessary, perform maintenance.

(U.S.A. only)

Indicates that all maintenance is required to correspond
to the driven distance on the maintenance schedule

Comes on approximately 5000 miles (8000 km)

after the message has been reset.

(The indicator will not work properly unless the mes-

sage has been reset.)



Perform the necessary maintenance. Please reset

the message after the maintenance is performed

(



P. 468)

(If equipped)

Indicates that the pre-collision system is not currently

functional because the grille cover or the sensor is dirty

This message also appears when the pre-collision sys-

tem is not functional due to overheating.



Check the grille cover and the sensor and clean

them if they are dirty.

In case of overheating, the system will become func-

tional once the system cools down.

Indicates that the EV drive mode is not available

The reason the EV drive mode is not available (the

vehicle is idling, battery charge is low, speed is higher

than the EV drive mode operating speed range, accel-

erator pedal is depressed too much) may be dis-

played.

A buzzer also sounds.



Use the EV drive mode when it becomes available.

Indicates that the EV drive mode has been automatically

canceled

The reason the EV drive mode is not available (the

battery charge is low, speed is higher than the EV

drive mode operating speed range, accelerator pedal

is depressed too much) may be displayed.

A buzzer also sounds.



Drive the vehicle for a while.

Warning message

Details/Actions

(Flashes

3 times)

Summary of Contents for CT 200H 2016

























































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CT 200H 2016

Reviews:

Related manuals for CT 200H 2016

Brands by name

Popular brands

Lexus CT 200H 2016, Owner'S Manual

Search results

Summary of Contents for CT 200H 2016

Reviews:

Related manuals for CT 200H 2016

Brands by name

Popular brands