Lexus CT 200H 2016, Owner'S Manual

Page: 500 / 632

500
CT200h_OM_OM76197U_(U)
7-3. Do-it-yourself maintenance
Wheels
When replacing wheels, care should be taken to ensure that they are equivalent
to those removed in load capacity, diameter, rim width and inset
*
.
Replacement wheels are available at your Lexus dealer.
*
: Conventionally referred to as “offset”.
Lexus does not recommend using the following:
●
Wheels of different sizes or types
●
Used wheels
●
Bent wheels that have been straightened
●
Use only Lexus wheel nuts and wrenches designed for use with your alumi-
num wheels.
●
When rotating, repairing or changing your tires, check that the wheel nuts are
still tight after driving 1000 miles (1600 km).
●
Be careful not to damage the aluminum wheels when using tire chains.
●
Use only Lexus genuine balance weights or equivalent and a plastic or rubber
hammer when balancing your wheels.
■
When replacing wheels
The wheels of your vehicle are equipped with tire pressure warning valves and transmit-
ters that allow the tire pressure warning system to provide advance warning in the event
of a loss in tire inflation pressure. Whenever wheels are replaced, tire pressure warning
valves and transmitters must be installed. (

P. 491)
If a wheel is bent, cracked or heavily corroded, it should be replaced. Other-
wise, the tire may separate from the wheel or cause a loss of handling control.
Wheel selection
Aluminum wheel precautions