Lexus CT 200H 2016 Owner'S Manual Download

Page: 32 / 632

1-1. For safe use

CT200h_OM_OM76197U_(U)

Seat belts

●

Extend the shoulder belt so that it
comes fully over the shoulder, but
does not come into contact with the
neck or slide off the shoulder.

●

Position the lap belt as low as possi-
ble over the hips.

●

Adjust the position of the seatback.
Sit up straight and well back in the
seat.

●

Do not twist the seat belt.

To fasten the seat belt, push the plate
into the buckle until a click sound is
heard.
To release the seat belt, press the
release button.

Push the seat belt shoulder anchor
down while pressing the release but-
ton.
Push the seat belt shoulder anchor
up.

Move the height adjuster up and down

as needed until you hear a click.

Make sure that all occupants are wearing their seat belts before driving the
vehicle.

Correct use of the seat belts

Fastening and releasing the seat belt

Release button

Adjusting the seat belt shoulder anchor height (front seats)

Release button

Summary of Contents for CT 200H 2016

























































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CT 200H 2016

Reviews:

Related manuals for CT 200H 2016

Brands by name

Popular brands

Lexus CT 200H 2016, Owner'S Manual

Search results

Summary of Contents for CT 200H 2016

Reviews:

Related manuals for CT 200H 2016

Brands by name

Popular brands