Lexus CT 200H 2016 Owner'S Manual Download

Page: 542 / 632

542

8-2. Steps to take in an emergency

CT200h_OM_OM76197U_(U)

Indicates a malfunction in:

• The cruise control system; or

• The dynamic radar cruise control system

Press the “ON-OFF” button once to deactivate the

system, and then press the button again to reactivate

the system.

A buzzer also sounds.



Have the vehicle inspected by your Lexus dealer.

(If equipped)

Indicates a malfunction in the pre-collision system

A buzzer also sounds.



Have the vehicle inspected by your Lexus dealer.

(If equipped)

Indicates that the moon roof is not fully closed (with the

power switch off, and the driver’s door open)

A buzzer also sounds.



Close the moon roof.

Indicates that the hybrid system has overheated

This message may be displayed when driving under

severe operating conditions. (For example, when driv-

ing up a long steep hill.)

A buzzer also sounds.



Stop and check. (



P. 566)

(If equipped)

Indicates a malfunction in the LED headlight system

A buzzer also sounds.



Have the vehicle inspected by your Lexus dealer.

Indicates that the washer fluid level is low



Add washer fluid.

Warning message

Details/Actions

(Flashes)

Summary of Contents for CT 200H 2016

























































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CT 200H 2016

Reviews:

Related manuals for CT 200H 2016

Brands by name

Popular brands

Lexus CT 200H 2016, Owner'S Manual

Search results

Summary of Contents for CT 200H 2016

Reviews:

Related manuals for CT 200H 2016

Brands by name

Popular brands