Lexus CT 200H 2016 Owner'S Manual Download

Page: 167 / 632

167

CT200h_OM_OM76197U_(U)

4-2. Driving procedures

iving

Turn signal lever

Right turn
Lane change to the right (move the
lever partway and release it)

The right hand signals will flash 3 times.

Lane change to the left (move the
lever partway and release it)

The left hand signals will flash 3 times.

Left turn

■

Turn signals can be operated when

The power switch is in ON mode.

■

If the indicator flashes faster than usual

Check that a light bulb in the front or rear turn signal lights has not burned out.

■

If the turn signals stop flashing before a lane change has been performed

Operate the lever again.

■

Customization

The number of times the turn signals flash during a lane change can be changed.

(Customizable features:



P. 591)

Operating instructions

Summary of Contents for CT 200H 2016

























































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CT 200H 2016

Reviews:

Related manuals for CT 200H 2016

Brands by name

Popular brands

Lexus CT 200H 2016, Owner'S Manual

Search results

Summary of Contents for CT 200H 2016

Reviews:

Related manuals for CT 200H 2016

Brands by name

Popular brands