Lexus CT 200H 2016 Owner'S Manual Download

Page: 62 / 632

1-1. For safe use

CT200h_OM_OM76197U_(U)

■

Laws and regulations pertaining to anchors

The LATCH system conforms to FMVSS225 or CMVSS210.2.

Child restraint systems conforming to FMVSS213 or CMVSS213 specifications can be

used.

This vehicle is designed to conform to the SAE J1819.

WARNING

■

When installing a booster seat

To prevent the belt from going into ALR lock mode, do not fully extend the shoulder

belt. ALR mode causes the belt to tighten only. This could cause injury or discomfort to

the child. (



P. 33)

■

When installing a child restraint system

Follow the directions given in the child restraint system installation manual and fix the

child restraint system securely in place.

If the child restraint system is not correctly fixed in place, the child or other passengers

may be seriously injured or even killed in the event of sudden braking, sudden swerving

or an accident.

●

When a booster seat is installed, always ensure that the shoulder belt is positioned

across the center of the child’s shoulder. The belt should be kept away from the child’s

neck, but not so that it could fall off the child’s shoulder. Failing to do so may result in

death or serious injury in the event of sudden braking, sudden swerving or an acci-

dent.

●

Ensure that the belt and plate are securely locked and the seat belt is not twisted.

●

Shake the child restraint system left and right, and forward and backward to ensure

that it has been securely installed.

●

If the seat is adjusted, reconfirm the security of the child restraint system.

●

Follow all installation instructions provided by the child restraint system manufacturer.

●

If the driver’s seat interferes with the child

restraint system and prevents it from being

attached correctly, attach the child restraint

system to the right-hand rear seat.

●

Adjust the front passenger seat so that it does

not interfere with the child restraint system.

●

Only put a forward-facing child restraint sys-

tem on the front seat when unavoidable.

When installing a forward-facing child

restraint system on the front passenger seat,

move the seat as far back as possible even if

the “AIR BAG OFF” indicator light is illumi-

nated. Failure to do so may result in death or

serious injury if the airbags deploy (inflate).

Summary of Contents for CT 200H 2016

























































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CT 200H 2016

Reviews:

Related manuals for CT 200H 2016

Brands by name

Popular brands

Lexus CT 200H 2016, Owner'S Manual

Search results

Summary of Contents for CT 200H 2016

Reviews:

Related manuals for CT 200H 2016

Brands by name

Popular brands