Lexus CT 200H 2016 Owner'S Manual Download

Page: 545 / 632

545

8-2. Steps to take in an emergency

CT200h_OM_OM76197U_(U)

When trouble

ari

ses

Interior

buzzer

Exterior

buzzer

Warning message

Details/Actions



Power was turned off due to the

automatic power off function.



Next time, start the hybrid sys-

tem and keep it on for approxi-

mately 5 minutes or more to

recharge the 12-volt battery.

Con-

tinuous



The driver’s door was opened while

any shift position other than P was

selected without turning off the

power switch.



Shift the shift position to P.

Con-

tinuous

Con-

tinuous

The electronic key was carried out-

side the vehicle and the driver’s door

was opened and closed while any

shift position other than P was

selected without turning off the

power switch.



Shift the shift position to P.



Bring the electronic key back

into the vehicle.

Once



An attempt was made to start the

hybrid system without the electronic

key being present, or the electronic

key was not functioning normally.



Start the hybrid system with the

electronic key present.

An attempt was made to drive when

the regular key was not inside the

vehicle.



Confirm that the electronic key

is inside the vehicle.

(Flashes)

Summary of Contents for CT 200H 2016

























































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CT 200H 2016

Reviews:

Related manuals for CT 200H 2016

Brands by name

Popular brands

Lexus CT 200H 2016, Owner'S Manual

Search results

Summary of Contents for CT 200H 2016

Reviews:

Related manuals for CT 200H 2016

Brands by name

Popular brands