Lexus CT 200H 2016 Owner'S Manual Download

Page: 530 / 632

530

8-2. Steps to take in an emergency

CT200h_OM_OM76197U_(U)

SRS warning light

Indicates a malfunction in:

• The SRS airbag system;

• The front passenger occupant classification system; or

• The seat belt pretensioner system



Have the vehicle inspected by your Lexus dealer immediately.

(U.S.A.)

(Canada)

ABS warning light

Indicates a malfunction in:

• The ABS; or

• The brake assist system



Have the vehicle inspected by your Lexus dealer immediately.

Electric power steering system warning light (warning buzzer)

Indicates a malfunction in the EPS system



Have the vehicle inspected by your Lexus dealer immediately.

(Flashes)

(If equipped)

“PCS” warning light

Indicates a malfunction in the pre-collision system

The warning light will operate as follows, even when the system is

not malfunctioning:

• The light will flash quickly when the system is operating.

(



P. 239)

• The light will turn on when the pre-collision braking is disabled.

(



P. 239)

• The light will turn on when the system cannot temporarily be

used. (



P. 543)



Have the vehicle inspected by your Lexus dealer immediately.

Slip indicator light

Indicates a malfunction in:

• The VSC system;

• The TRAC system; or

• The hill-start assist control system



Have the vehicle inspected by your Lexus dealer immediately.

The light will flash when the VSC, TRAC and/or ABS systems are

operating.

(If equipped)

Automatic headlight leveling system warning light

Indicates a malfunction in the automatic headlight leveling system



Have the vehicle inspected by your Lexus dealer immediately.

High coolant temperature warning light

Changes from a flashing to a solid light when the engine coolant

temperature increases



Stop and check. (



P. 566)

Open door warning light (warning buzzer)

Indicates that a door is not fully closed



Check that all the doors are closed.

Warning light

Warning light/Details/Actions

Summary of Contents for CT 200H 2016

























































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CT 200H 2016

Reviews:

Related manuals for CT 200H 2016

Brands by name

Popular brands

Lexus CT 200H 2016, Owner'S Manual

Search results

Summary of Contents for CT 200H 2016

Reviews:

Related manuals for CT 200H 2016

Brands by name

Popular brands