Lexus CT 200H 2016 Owner'S Manual Download

Page: 194 / 632

194

CT200h_OM_OM76197U_(U)

4-5. Using the driving support systems

■

Dynamic radar cruise control can be set when

●

The shift position is in D.

●

Vehicle speed is above approximately 30 mph (50 km/h).

■

Accelerating after setting the vehicle speed

The vehicle can accelerate normally. After acceleration, the set speed resumes. How-

ever, during vehicle-to-vehicle distance control mode, the vehicle speed may decrease

below the set speed in order to maintain the distance to the vehicle ahead.

■

Set speed

The set speed may be unsustainable depending on driving circumstances.

■

Automatic cancelation of vehicle-to-vehicle distance control

Vehicle-to-vehicle distance control driving is automatically canceled in the following situ-

ations:

●

Actual vehicle speed falls below approximately 25 mph (40 km/h).

●

Enhanced VSC is activated.

●

The sensor cannot operate correctly because it is covered in some way.

●

The windshield wipers are operating at high speed. (when the wiper switch is set to the

“AUTO” mode or the high speed wiper operation position).

If vehicle-to-vehicle distance control driving is automatically canceled for any other rea-

son, there may be a malfunction in the system. Contact your Lexus dealer.

■

Automatic cancelation of constant speed control

The cruise control will stop maintaining the vehicle speed in the following situations:

●

Actual vehicle speed is more than approximately 10 mph (16 km/h) below the set vehi-

cle speed.

At this time, the memorized set speed is not retained.

●

Vehicle speed falls below approximately 25 mph (40 km/h).

●

Enhanced VSC is activated.

■

Radar sensor and grille cover

Always keep the sensor and grille cover clean to ensure that the vehicle-to-vehicle dis-

tance control operates properly. (Some obstructions, such as snow, ice and plastic

objects, cannot be detected by the obstruction sensor.)

Dynamic radar cruise control is canceled if an obstruction is detected.

■

Warning messages and buzzers for dynamic radar cruise control

Warning messages and buzzers are used to indicate a system malfunction or to inform

the driver of the need for caution while driving. (



P. 536)

Grille cover
Radar sensor

Summary of Contents for CT 200H 2016

























































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CT 200H 2016

Reviews:

Related manuals for CT 200H 2016

Brands by name

Popular brands

Lexus CT 200H 2016, Owner'S Manual

Search results

Summary of Contents for CT 200H 2016

Reviews:

Related manuals for CT 200H 2016

Brands by name

Popular brands