Lexus CT 200H 2016 Owner'S Manual Download

Page: 161 / 632

CT200h_OM_OM76197U_(U)

161

4-2. Driving procedures

iving

■

Switching to EV drive mode when the gasoline engine is cold

If the hybrid system is started while the gasoline engine is cold, the gasoline engine will

start automatically after a short period of time in order to warm up. In this case, you will

become unable to switch to EV drive mode.

After the hybrid system has started and the “READY” indicator has illuminated, press the

EV drive mode switch before the gasoline engine starts to switch to EV drive mode.

■

Automatic cancellation of EV drive mode

When driving in EV drive mode, the gasoline engine may automatically restart in the fol-

lowing situations. When EV drive mode is canceled, a buzzer will sound and the EV drive

mode indicator will flash and go off.

●

The hybrid battery (traction battery) becomes low.

The remaining battery level indicated in the “Energy Monitor” display is low. (



P. 92)

●

Vehicle speed becomes high.

●

The accelerator pedal is depressed firmly or the vehicle is on a hill etc.

When it is possible to inform the driver of automatic cancelation in advance, a prior

notice screen will appear on the multi-information display.

■

Possible driving distance when driving in EV drive mode

EV drive mode’s possible driving distance ranges from a few hundred meters to approxi-

mately 0.6 mile (1 km). However, depending on vehicle conditions, there are situations

when EV drive mode cannot be used. (The distance that is possible depends on the

hybrid battery [traction battery] level and driving conditions.)

■

Fuel economy

Your Lexus is designed to achieve the best possible fuel economy during normal driving

(using the gasoline engine and electric motor [traction motor]). Driving in EV drive

mode more than necessary may lower fuel economy.

WARNING

■

Caution while driving

When driving in EV drive mode, pay special attention to the area around the vehicle.

Because there is no engine noise, pedestrians, people riding bicycles or other people

and vehicles in the area may not be aware of the vehicle starting off or approaching

them, so take extra care while driving.

Summary of Contents for CT 200H 2016

























































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CT 200H 2016

Reviews:

Related manuals for CT 200H 2016

Brands by name

Popular brands

Lexus CT 200H 2016, Owner'S Manual

Search results

Summary of Contents for CT 200H 2016

Reviews:

Related manuals for CT 200H 2016

Brands by name

Popular brands