Lexus CT 200H 2016 Page 140 Owner'S Manual Download

Page: 140 / 632

140

CT200h_OM_OM76197U_(U)

3-5. Opening, closing the windows and moon roof

Moon roof



Opens the moon roof

Push and hold “OPEN” for more than 1

second. The moon roof tilts up and then

opens automatically.

Closes the moon roof

Push and hold “CLOSE” for more than 1

second. The moon roof closes automati-

cally and stops slightly before the tilt up

position.

Push and hold “CLOSE” again to fully

close the moon roof.

: Lightly press either end of the moon roof switch to stop the moon roof partway.

Tilts the moon roof up

Tilts the moon roof down

: Lightly press either end of the moon roof

switch to stop the moon roof partway.

■

The moon roof can be operated when

The power switch is in ON mode.

■

Operating the moon roof after turning the hybrid system off

The moon roof can be operated for approximately 45 seconds even after the power

switch is turned to ACCESSORY mode or turned off. It cannot, however, be operated

once either front door is opened.



: If equipped

Use the overhead switches to open and close the moon roof and tilt it up and
down.

Opening and closing

Tilting up and down

Summary of Contents for CT 200H 2016

























































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CT 200H 2016

Reviews:

Related manuals for CT 200H 2016

Brands by name

Popular brands

Lexus CT 200H 2016, Owner'S Manual

Search results

Summary of Contents for CT 200H 2016

Reviews:

Related manuals for CT 200H 2016

Brands by name

Popular brands