Lexus CT 200H 2016, Owner'S Manual

Page: 208 / 632

208
CT200h_OM_OM76197U_(U)
4-5. Using the driving support systems
■
If a message is displayed on the multi-information display

P. 536
■
Certification

For vehicles sold in the U.S.A.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions; (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.

For vehicles sold in Canada
This ISM device complies with Canadian ICES-001.
Cet appareil ISM est conforme à la norme NMB-001 du Canada.
■
Customization
Settings (e.g. buzzer sounds volume) can be changed.
(Customizable features:

P. 591)
WARNING
■
When using the intuitive parking assist
Observe the following precautions.
Failing to do so may result in the vehicle being unable to be driven safely and possibly
cause an accident.
●
Do not use the sensor at speeds in excess of 6 mph (10 km/h).
●
The sensors’ detection areas and reaction times are limited. When moving forward or
reversing, check the areas surrounding the vehicle (especially the sides of the vehi-
cle) for safety, and drive slowly, using the brake to control the vehicle’s speed.
●
Do not install accessories within the sensors’ detection areas.
NOTICE
■
When using intuitive parking assist
In the following situations, the system may not function correctly due to a sensor mal-
function etc. Have the vehicle checked by your Lexus dealer.
●
The intuitive parking assist operation display flashes, and a buzzer sounds when no
obstacles are detected.
●
If the area around a sensor collides with something, or is subjected to strong impact.
●
If the bumper collides with something.
●
If the display shows continuously without beeping, except when the buzzer mute
switch has been turned on.
●
If a display error occurs, first check the sensor.
If the error occurs even if there is no ice, snow or mud on the sensor, it is likely that the
sensor is malfunctioning.
■
Notes when washing the vehicle
Do not apply intensive bursts of water or steam to the sensor area.
Doing so may result in the sensor malfunctioning.