Lexus CT 200H 2016 Page 392 Owner'S Manual Download

Page: 392 / 632

392

5-21. Bluetooth

(Lexus Display Audio System)

CT200h_OM_OM76197U_(U)

■

Compatible models

The Bluetooth

audio system supports portable audio players with the following specifi-

cations

●

Bluetooth

specifications:

Ver. 2.0 or higher (Recommended: Ver. 3.0 +EDR or higher)

●

Profiles:
• A2DP (Advanced Audio Distribution Profile) Ver. 1.0, or higher

(Recommended: Ver. 1.2 or higher)

This is a profile to transmit stereo audio or high quality sound to the audio system.

• AVRCP (Audio/Video Remote Control Profile) Ver. 1.0 or higher

(Recommended: Ver. 1.4 or higher)

This is a profile to allow remote control the A/V equipment.

However, please note that some functions may be limited depending on the type of por-

table audio player connected.
The hands-free system supports cellular phones with the following specifications.

●

Bluetooth

specification:

Ver. 2.0 or higher (Recommended: Ver. 3.0 +EDR or higher)

●

Profiles:
• HFP (Hands Free Profile) Ver. 1.0 or higher (Recommended: Ver. 1.6 or higher)

This is a profile to allow hands-free phone calls using a cellular phone or head set. It

has outgoing and incoming call functions.

• OPP (Object Push Profile) Ver. 1.1 or higher (Recommended: Ver. 1.2)

This is a profile to transfer phonebook data. When a Bluetooth

compatible cellular

phone has both PBAP and OPP, OPP cannot be used.

• PBAP (Phone Book Access Profile) Ver. 1.0 or higher (Recommended: Ver. 1.1)

This is a profile to transfer phonebook data.

• MAP (Message Access Profile) Ver.1.0 or higher

This is a profile to using phone message.

If the cellular phone does not support HFP, you cannot register it with the hands-free sys-

tem. OPP, PBAP or MAP services must be selected individually.

■

Reconnecting the portable audio player

If the portable audio player is disconnected due to poor reception when the power

switch is in ACCESSORY or ON mode, the system automatically reconnects the porta-

ble audio player.
If you have switched off the portable audio player yourself, follow the instructions below

to reconnect:

●

Select the portable audio player again

●

Enter the portable audio player

■

When you sell your car

Be sure to delete your personal data. (



P. 331)

Summary of Contents for CT 200H 2016

























































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CT 200H 2016

Reviews:

Related manuals for CT 200H 2016

Brands by name

Popular brands

Lexus CT 200H 2016, Owner'S Manual

Search results

Summary of Contents for CT 200H 2016

Reviews:

Related manuals for CT 200H 2016

Brands by name

Popular brands