Lexus CT 200H 2016 Owner'S Manual Download

Page: 514 / 632

514

CT200h_OM_OM76197U_(U)

7-3. Do-it-yourself maintenance

Replace the light bulb, and install
the bulb base.

Align the 3 tabs on the light bulb with

the mounting, and insert.

Turn and secure the bulb base.

Shake the bulb base gently to check

that it is not loose, turn the headlight

high beams on once and visually

confirm that no light is leaking

through the mounting.

When installing the cover, conduct step in reverse.

■

Halogen fog light (if equipped)

Remove 2 screws, a bolt and clip,
and pull down the fender liner.

Pull the fender liner down slowly,

being careful not to dislodge any

fixed components.

Summary of Contents for CT 200H 2016

























































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CT 200H 2016

Reviews:

Related manuals for CT 200H 2016

Brands by name

Popular brands

Lexus CT 200H 2016, Owner'S Manual

Search results

Summary of Contents for CT 200H 2016

Reviews:

Related manuals for CT 200H 2016

Brands by name

Popular brands