Lexmark X46 Series, Service Manual

Page: 52 / 310

2-14
Service Manual
7014-xxx
Held jobs may not be
restored (Insufficient
Memory 37) This message is only posted once after the firmware has tried to restore all of the
jobs on disk, regardless of the number of held jobs that were not restored. There
are three versions of this IR, depending upon cause. IRHeldB occurs when the
printer runs out of memory while attempting to restore jobs from disk.
Held jobs may not be
restored (Config Change
57)
This message is only posted once after the firmware has tried to restore all of the
jobs on disk, regardless of the number of held jobs that were not restored.
There are three versions of this IR, depending upon cause. IRHeldC occurs when
the printer could not restore jobs from the disk because the configuration of the
printer has changed. Some of these said configuration changes are code version
changes, paper handling option(s) removed, or the disk was moved from a
different model or speed of printer.
Load < source > < custom
string >
Printer does not detect media meeting the description < custom string > in
< source >, where < source > is Tray 1, Tray 2, Multi-Page Feeder (MP feeder), or
Envelope Feeder.
• Load the input source with the correct type and size media.
• Cancel the current job.
Load < source >
< custom type >
Printer does not detect media meeting the description < custom type > in < source >,
where < source > is Tray 1 or Tray 2.
• Load the input source with the correct type and size media.
• Cancel the current job.
Load < source >
< size >
Printer does not detect media meeting the size requested in the source indicated.
• Load the input source with the correct type and size media.
• Cancel the current job.
Load < source >
< type > < size >
Printer does not detect media meeting the size or type requested in the source
indicated.
• Load the input source with the correct type and size media.
• Cancel the current job.
Load Manual
<
custom type >
Printer does not detect media meeting the description < custom type > in the single
sheet feeder (manual feeder).
The following actions can be taken:
• Load paper, and the job continues.
• press
Select ( ), and choose an alternate source for media.
• Cancel the current job.
Load Manual
<
custom string >
Printer does not detect media meeting the description < custom string > in the
single sheet feeder (manual feeder).
The following actions can be taken:
• Load paper and the job continues.
• press
Select ( ), and choose an alternate source for media.
• Cancel the current job.
Load Manual
< size >
Printer does not detect media meeting the description < size > in the single sheet
feeder (manual feeder).
The following actions can be taken:
• Load paper and the job continues.
• press
Select ( ), and choose an alternate source for media.
• Cancel the current job.
User status and attendance messages (Continued)
User primary message Explanation