Lexmark X46 Series, Service Manual

Page: 251 / 310

Repair information
4-89
7014-xxx
Flatbed removal
1.
Remove the left side cover. See “Left side cover removal” on page 4-33 .
2.
Remove the left scanner cover. See “Left scanner cover removal” on page 4-103 .
3.
Remove the right scanner cover. See “Right scanner cover removal” on page 4-104 .
4.
Remove the right side cover. See “Right side cover removal” on page 4-80 .
5.
Remove the ADF unit. See “ADF unit removal” on page 4-88 .
6.
Raise the flatbed unit to the up position.
7.
Remove the controller board shield. See “Controller board shield” on page 4-11 .
8.
Disconnect FBmtr from connector J28, FB home from connector J13, CCD from connector J30, and
Plegnth sensor cables from connector J12 on the controller board.
9.
Using a flatbed screwdriver, depress the lower tab on the kickstand, and lift the kickstand out of the left
rear frame assembly.