Lexmark X46 Series, Service Manual

Page: 108 / 310

3-2
Service Manual
7014-xxx
Configuration menu (CONFIG MENU)
Available menus
Note: Menus may vary depending on the features and options of the printer.
Maintenance Count Value See “Maintenance Count Value (Maint Cnt Value)” on page 3-3 .
Reset Maintenance Count See “Reset Maintenance Counter” on page 3-3 .
Reset Photoconductor Maintenance
Count See “Reset Photoconductor Maintenance Counter (Reset PC
Cnt)” on page 3-4 .
USB Scan to Local See “USB Scan to Local” on page 3-4 .
Print Quality Pages See “Print Quality Pages” on page 3-4 .
Reports See “Reports” on page 3-32 .
Panel Menus See “Panel Menus” on page 3-4 .
PPDS Emulation See “PPDS Emulation” on page 3-5 .
Download Emuls See “Download Emuls” on page 3-5 .
Factory Defaults See “Factory Defaults” on page 3-6 .
Energy Conserve See “Jobs on Disk” on page 3-10 .
Min Copy Memory See “Min Copy Memory” on page 3-6 .
Num Pad Job Assist See “Num Pad Job Assist” on page 3-7 .
Format Fax Storage See “Format Fax Storage” on page 3-7 .
Fax Storage Location See “Fax Storage Location” on page 3-7 .
ADF Edge Erase See “ADF Edge Erase” on page 3-7 .
FB Edge Erase See “FB Edge Erase” on page 3-7 .
Scanner Manual Registration See “Scanner Manual Registration” on page 3-8 .
Disable Scanner See “Disable Scanner” on page 3-9 .
Paper Prompts See “Paper Prompts” on page 3-9 .
Envelope Prompts See “Envelope Prompts” on page 3-9 .
Action for Prompts See “Action For Prompts” on page 3-9 .
Jobs On Disk See “Jobs on Disk” on page 3-10 .
Disk Encryption See “Disk Encryptyion” on page 3-10 .
Wipe Disk See “Wipe Disk” on page 3-13 .
Font Sharpening See “Jobs on Disk” on page 3-10 .
Require Standby See “Require Standby” on page 3-14 .
LES Applications See “LES Applications” on page 3-15 .
Key Repeat Initial Delay See “Key Repeat Initial Delay” on page 3-15 .
Key Repeat Rate See “Key Repeat Rate” on page 3-15 .
Wiper Message See “Wiper Message” on page 3-15 .
Clear Custom Status See “Clear Custom Status” on page 3-16 .
USB Speed See “USB Speed” on page 3-16 .
USB PnP See “USB PnP” on page 3-16 .
Exit Config Menu See “Require Standby” on page 3-14 .